Model SG20, 1250mm, 3 wire poteniometer. |
SIKO SG20 draw wire actuated encoder, 1250mm measuring length, with 10Kohm potentiometer, with integral cable, 2 metre electrical cable length, -10°C to +80°C, IP50 protection. |
Order Code:SG20-1250-P10-E1-2-T1 |  | SIKO SG20 Series:
The SIKO SG20 series is a compact, wire actuated linear measuring transducer with a robust die-cast case.
Easy Mounting via 2 of M4 x 8mm tapped holes.
Standard Measuring Lengths: 1250, 1500, 1750, 2000mm.
Electrical Interface:Integral cable or connector and cable.
SIKO SG20 P10 tableSIKO SG20 with P10 encoder, 10K potentiometer. | | Feature | Technical Information | Value of resistance | 10kohm | Linearity of potentiometer | 0.25% | Resistance tolerance | ±5% | Power rating | 1 watt | Pull-out length | 0mm = 0 ohm | Cable length (3 wire connection) | Max = 30m | Please use the ORDER CODE BUILDER to specify for your application: | |
|
SIKO SG20 4-20mA tableSIKO SG20 with 4-20mA output. | | Feature | Technical Information | Output current | 4-20mA | Measuring transducer | 10K potentiometer | Operating voltage | 14 to 28Vdc | Load resistance | < 500 ohms | Cable length (2 wire connection) | Max = 30m | Please use the ORDER CODE BUILDER to specify for your application: | |
|
SIKO SG20 0-10Vdc tableSIKO SG20 with 0-10Vdc output. | | Feature | Technical Information | Output voltage | 0-10Vdc | Measuring transducer | 10K potentiometer | Operating voltage | 14 to 28Vdc | Recommend load resistance | 2 ~ 10Kohm to GND | Cable length (3 wire connection) | Max = 20m | Please use the ORDER CODE BUILDER to specify for your application: | |
|
| |

|
| |
Supplier: | SIKO GMBH |
Packaging: | 1 |
Min. Order: | 0 |
|
|